Pipe Coating Mesh

Pipe Coating Mesh

Catalogue & Technical Specification

Quality Wire product is a single larges source in the Middle East to manufacture and supply of pipe coating mesh. Pipe winding mesh is used as reinforcement for steel pipe which will be coated with concrete and then submerged in water or earth. The wire mesh acts as a holding and a reinforcement agent during the process of concrete coating thus gives additional strength to the coated pipe.

We offer 2 types of pipe coating mesh, welded pipe coating mesh and woven hexagonal pipe coating mesh. The mesh is manufactured by state of art equipment and is one of the best qualities offered. QWP pipe coating mesh is supplied in different widths, roll lengths, and crimp factors in function of the requirements and the equipment of the coating contractors and of the pipe specification. The result is Cost-effective coating that meets all specification.

• The exceptional continuity and uniformity of Pipe Coating Mesh enhances even more the ability of the concrete coating withstand impact.
• The high bonding level between the concrete and the reinforcement obtained by a combination of the high specific and an optimum spread of the reinforcement throughout the entire layer of concrete increases the impact resistance of the coating.
• The high degree of flexibility in the longitudinal direction of the Pipe is important for spreading and minimizing cracks during the laying of the pipeline.
• A coating reinforced with QWP Pipe Coating Mesh has uniform compressive strength.
• The use of hot-dip galvanized wire extends the lifetime of the reinforcement.

Our catalog offers complete information as to features, types, specifications and ASTM standards.

Quality Wire Product Co. W.L.L. is the single largest source in the Middle East for manufacturing and supply of pipe coating mesh suitable for steel pipe winding applications. Pipe coating is a wire mesh made of galvanized low carbon steel wire and it is of two types – welded pipe coating mesh and woven hexagonal pipe coating mesh. Pipe winding mesh is used as reinforcement for steel pipe which will be coated with concrete and then submerged in water or earth. The wire mesh acts as a holding and a reinforcement agent during the process of concrete coating thus gives additional strength to the concrete coated pipe. The wire mesh helps in holding the concrete intact even after drying preventing the steel pipe from corrosion by not exposing the steel pipe to water or moisture for many years of installation. This helps in the longer life of the pipe laid to transfer water oil as per end user requirements. With precise opening and heavy coating we shall produce the excellent quality mesh suitable for pipe coating applications.

Welded pipe coating mesh is manufactured by welding a series of parallel longitudinal wires to transverse wire to from rectangular openings. The longitudinal wires shall be crimped or not crimped.

Typical wire diameters from 1.4mm to 3.0mm are used in this application depending upon the thickness of the concrete coating and the diameter of the pipe. The longitudinal wires are corrugated specially during the process of mesh production in order to accelerate the holding capacity of the concrete during the coating process.

QWP welded Pipe Coating Mesh comes in 2 regular types, as shown below. Customized types are available upon request.

• Core diameter of the roll : 200mm
• Rolls are packed in bundle of 5 or 6 rolls
• Roll width is 190mm to 260MM
• Cross wire distance is 67mm & other specifications as per customer requirement
• Length of roll : 11Mtr to 240Mtr depending upon customer requirement

*Additional Customized specification, in terms of roll width, wire diameter and cross wire distance is available upon customer’s request.

The hexagonal wire mesh fabric is manufactured by twisting wires to from a series of openings; hexagonal in shape, with one of the edges of the fabric shall be constructed to include a selvage wire. Additional longitudinal reinforcing wires are included when specified by the purchaser.

• Roll Width 190mm.
• Length of roll depending upon customer requirement.

QWP pipe coating mesh is manufactured complying with the ASTM standards specified below.

• ASTM A82A82M: Standard specification for steel wire, plain, for concrete reinforcement.
• ASTM A641A641M: Standard specification for zinc-coated (galvanized) carbon steel wire.
• ASTM A90A90M: Test Method for the weight of coating on iron and steel articles with zinc.
• ASTM A185: Standard specification for steel welded wire reinforcement, plain, for concrete.
• ASTM A810A810 – 01: Standard specification for zinc-coated (Galvanized) steel winding mesh.